Gas, Oil, Plumbing, Electrical, Renewable Energy, Solid Fuel Training and Assessment Centre CSCS Cards and Online Courses
Gas, Oil, Plumbing, Electrical, Renewable Energy, Solid Fuel Training and Assessment CentreCSCS Cards and Online Courses 

Inspection and Testing

Inspection and Testing (5-Day Combination Course + 1/2 Day Assessment)

 

This is an EAL course that combines Initial Verification and Periodic Inspection qualifications. These courses are the same level as City & Guilds. This qualification is equally acceptable to JIB for the purposes of grading and by NICEIC etc.  

 

To dispel any doubt please check Section 4 of the JIB handbook which clearly states for Approved Electrician etc: “the qualifications needed to cover the full scope of Inspection and Testing are City & Guilds 2394 or the EAL Level 3 Award in the Initial Verification and Certification of Electrical Installations and the City & Guilds 2395 or the EAL Level 3 Award in the Periodic, Inspection, Testing and Certification of Electrical Installations”.

 

So to be clear, these courses are the equivalent of C&G 2394 and 2395.

 

Why EAL? Well we like EAL because they are very closely linked with industry and find they are more practically focused. (If you are doing a JTL apprenticeship nowadays chances are you will be taking EAL exams and undertaking EAL NVQs).

 

We also like the fact that we can book EAL exams at any time we like and are not stuck with just a couple of times a year.

 

The combined course will give the candidate the full set of qualifications in Initial Verification and Periodic Inspection.  

 

Completion of the course will enable the candidate to demonstrate that they are conversant with the methods laid out by the IET (Institute of Electrical Technology) BS 7671:2008 (Amd 3:2015) and Guidance Note 3 along with supporting legislation and codes of practice.

 

Course Content

 

The course is centred around IET Guidance Note 3, BS 7671, The “On Site Guide” and commonly used NICEIC forms.

 

You will receive both practical and theoretical training.

 

You will using our centre-developed training rigs and assessment rigs.

 

All instruments are supplied, but if you wish to bring your own you are very welcome (provided they are in compliance with GS38).

 

In addition to our training and preparation, the candidate will complete a series of practical assessments and two on-line (open-book) exams at our comfortable and relaxed premises at Witney, Oxfordshire.

 

Who is it for?

 

The qualification is intended for personnel working in the electrical industry and is required for the electrical installer who wishes to enter the commercial sector of electrical installations.

 

If you think you may be eligible please just give us a call or drop us a line.

 

Variations?

 

We can deliver this course as two separate qualifications if you like, the only proviso is you must pass the Initial Verification qualification before you undertake the Periodic Inspection qualification.

 

We can also deliver this course in a variety of formats (according to the demand). For example, we can deliver this in a straight 5 days or one day a week over 5 weeks + 2 Days Assessment. Please don’t be afraid to ask.

 

Next course; for details phone 01993 771155 

 

 

Oxford Energy Academy Ltd

Avenue One

Station Lane

Witney 

Oxfordshire

OX28 4XZ

 

Tel: 01993 771155

e.mail: info@oxford-energy-academy.co.uk

 

Reception hours

A team member will be available to talk to you from

8.30am to 5.00pm Mon to Fri. 8.30am to 12.30pm Sat

 

You can also use our contact form.

 

 

Oxford Energy Academy Ltd

Avenue One

Station Lane

Witney 

Oxfordshire

OX28 4XZ

 

Tel: 01993 771155

e.mail: info@oxford-energy-academy.co.uk

 

Reception hours

A team member will be available to talk to you from

8.30am to 5.00pm Mon-Fri

8.30am to 12.30pm Sat.


You can also use our contact form.

 

 

Print Print | Sitemap
© Oxford Energy Academy Ltd

This website was created using 1&1 MyWebsite.